Many PBX licenses and SIP trunks are sized by simultaneous calls, so getting the number right matters. Buy too few and callers get a busy signal on your busiest morning; buy too many and you pay every year for capacity nobody uses. This guide explains what counts, how to measure your real peak, how to calculate the number with a worked example and how to turn it into a license.

What counts as a simultaneous call

Simultaneous calls (SC), also called concurrent calls, are the calls active on your phone system at the same moment. Trunk providers often call the same thing "channels". The number that matters is your peak, not your average, and it's rarely the same as your number of users: 40 people in an office are almost never all on the phone at once.

What counts depends on the platform. On 3CX, both internal and external calls count toward the license, while an idle extension uses nothing. In practice, plan for every call the PBX is handling:

  • External calls, inbound and outbound
  • Internal calls between extensions (on 3CX)
  • Callers waiting in a queue or listening to an IVR menu, even though no person has answered yet
  • Calls on hold or parked
  • Conference participants and outbound campaign calls

Queues are the item most people forget. If ten callers are waiting while eight agents talk, the system is carrying 18 calls, not eight. Our comparison of call queues vs ring groups explains how each routing method behaves at peak.

The four limits to check

Your real capacity is the lowest of four separate limits. Sizing only one of them is a common reason calls fail even though "we bought enough".

LimitWhat sets itCounts internal calls?
PBX licenseThe SC size you buy (3CX) or the concurrent calls in your subscription (Yeastar Software Edition)Yes on 3CX
HardwareThe appliance or server; for example, a Yeastar P550 handles up to 25 concurrent callsDepends on the platform
SIP trunk channelsYour contract with the providerNo, external calls only
Internet bandwidthYour connection and the codec in useOnly when the call crosses the internet link

For bandwidth, Cisco's per-call figures are a good planning baseline: about 87.2 kbps in each direction for a G.711 call on Ethernet, and about 31.2 kbps for G.729, at the usual 20 ms packet size. Our guide to VoIP bandwidth requirements shows the full calculation, and SIP trunking explained covers how providers sell channels.

Step 1: Find your busiest hour

  1. Export call detail records (CDRs) from your current phone system, or ask your carrier for itemized records covering at least four normal weeks.
  2. Find the busiest hour of the busiest days. For many businesses it's a weekday morning, the first working day after a holiday or the last days of the month.
  3. For that hour, note the number of calls, the average call length and, if your system reports it, the maximum number of calls active at once.
  4. Add events the records don't show yet: a planned campaign, a new support line, seasonal peaks.

If your current system reports peak concurrent calls directly, that figure plus growth headroom is often all you need. If it only gives call counts and durations, use the calculation below.

Step 2: Convert it to channels with Erlang B

Telephone traffic is measured in Erlangs: one Erlang is one line kept busy for a full hour. Busy-hour traffic in Erlangs equals the number of calls in that hour multiplied by the average call length in hours. The Erlang B formula, the standard method for sizing lines and trunks, then tells you how many channels you need so that only a chosen share of calls is blocked. A common target is 1%, or one call in a hundred during the busiest hour.

Busy-hour traffic (Erlangs)Channels for 1% blocking
27
410
613
815
1018
1524
2030

Notice that capacity doesn't scale one-to-one. Larger groups of channels are used more efficiently, which is why the ratio of channels to traffic falls as volume grows.

A worked example

Take a 35-person company with a small sales and support team. Its records show this busiest hour:

  • 90 external calls averaging 4 minutes: 90 × 4 ÷ 60 = 6 Erlangs
  • 20 internal calls averaging 2 minutes: about 0.7 Erlangs
  • Inbound callers waiting an average of 1 minute in the queue: 90 × 1 ÷ 60 = 1.5 Erlangs

Total traffic is about 8.2 Erlangs. Erlang B gives 16 channels for 1% blocking. With only 8, roughly one call in four would fail during that hour; with 12, about one in twenty. So this company needs a 16SC license, even though 35 users sits inside 3CX's recommended range for 8SC.

The SIP trunk needs fewer channels, because internal calls never touch it: the external calls plus waiting callers come to 7.5 Erlangs, or 15 channels at 1%. At G.711, 15 external calls need about 1.3 Mbps in each direction, before any other traffic on the line.

Step 3: Map the result to a license or system

At the time of writing (November 2026), 3CX sells commercial licenses in sizes of 8, 16, 24, 32, 48 and 64 SC and up. Each size also has a maximum number of users or extensions, so check both numbers:

3CX sizeRecommended usersMaximum users
8SC16 to 4040
16SC41 to 8080
24SC81 to 120120
32SC121 to 192192
48SC193 to 288288

Round up to the next size above both your calculated channels and your user count. The edition (Basic, PRO or AI) is a separate decision about features; our guide to 3CX editions covers it, and 3CX PRO vs Enterprise compares the two editions most teams shortlist.

On a Yeastar appliance, concurrent calls are fixed by the model: 10 on the P520, 25 on the P550, 30 on the P560 (60 with a DSP module) and 60 on the P570 (up to 120). The Yeastar Software Edition is licensed by extensions and concurrent calls you choose. The plans are compared in Yeastar P-Series plans compared.

Contact centers and outbound dialing

Erlang B assumes blocked calls simply go away, which is fine for an office but not for a contact center. If every agent is busy and calls wait in a queue, size from agents plus the maximum number of callers you're prepared to hold, and cap the queue length so extra callers get an overflow route instead of a dead line. Automatic dialers raise the count further, because a power or predictive dialer places more calls than there are free agents and each ringing attempt occupies a channel. A safe starting point is the number of agents multiplied by the dial ratio, plus your inbound peak. Our 3CX auto dialer guide covers dialing modes.

Headroom and growth

Size for the next 12 to 24 months, not just today. Licenses usually renew yearly, and 3CX lets you move to a larger size when you need it, so you don't have to buy for five years of growth. Do leave room for the predictable: hiring already planned, a seasonal spike, a marketing campaign that sends a burst of calls. If your Erlang result lands exactly on a license size, take the next one.

Common sizing mistakes

  • Counting users instead of calls: it oversizes quiet offices and undersizes busy contact centers.
  • Forgetting internal calls on platforms that count them, such as 3CX.
  • Ignoring queue time: callers on hold music occupy capacity.
  • Sizing the license but not the trunk or bandwidth: the lowest limit wins.
  • Sizing to the average hour: the busy hour is what callers experience.
  • Overlooking hosted call paths: with a cloud PBX, an internal call between two desk phones in the same office can still cross your internet link.

For the bigger picture of choosing and running a phone system, see our business VoIP phone system guide.

How BtoBSkills can help

Send us a month of call records, or simply your user count and busiest-hour volume, and we'll calculate the size with you. We supply 3CX licenses by simultaneous calls, from the 3CX PRO license to the 3CX Enterprise license (now AI Edition), and can check your trunk channels and bandwidth at the same time. Request a quote to get a sizing recommendation.